manualshive.com logo in svg

Avision FL-1507B, User Manual

Share
Download
Avision FL-1507B User Manual Download Page 32

User’s Manual

 

 

 

23 

 

 

 

 

 

 

 

 

 

 
3.

 

Choose your desired file format from the File Format drop 

down list box. (Default is JPEG, other choice includes TIFF, 

MTIFF, PDF, MPDF, GIF, and BMP.) The supported file 

formats vary depending on your scanner model. 

4.

 

Type your desired folder name and file name in the File Path 

box. (Default is C:\Documents and Settings\User Name\My 

Documents\My Scan\Image.) 

Note: If you do not wish to save the scanned image, 

deselect the Save button since default is Save Enable. In this 

case, the thumbnail view will be disabled.  And therefore, 

after viewing all the scanned images, only the last one will 

remain on the screen.   

5.

 

Click the Setup button (

) or choose Setup from the 

File menu to prompt the Scanner Properties dialog box. 

 

 

 

 

 

 

 

 

 

 

 

Setup    

Actual  
Size

Fit 
Page 

Scan 

File Format 

Save                             File Path 

Summary of Contents for FL-1507B
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands