manualshive.com logo in svg

Avision FL-1507B, User Manual

Share
Download
Avision FL-1507B User Manual Download Page 123

User’s Manual

 

 

 

114 

 

7.2.2

 

Connect the scanner to a Wi-Fi network in a client 

mode (default mode) 

 

In a Client mode, your mobile devices and scanner are 

connected wirelessly through an additional AP (Access Point). 

This mode is also the default wireless mode. 

 

 

Connect Your Scanner to an Access Point:  

 

Important:  

Note To connect the scanner in a wireless network, please first 

disconnect the Ethernet cable connecting to your scanner. 

a.

 

Press the Wi-Fi button on the scanner to turn on Wi-Fi. If 

connection is successful, the blue Wi-Fi LED light will be 

flashing. 

b.

 

On your wireless computer or mobile devices such as 

smartphone or tablet, open your browser (i.e. 10 or 

above). 

c.

 

Type the scanner’s permanent IP (10.10.10.254) address 

on the URL bar (

http://10.10.10.254

).  

d.

 

A login dialog box will be first displayed. Type the default 

user name and password – [admin] to login the scanner’s 

embedded web page. (If desired, the default password can 

-  AP (Access Point) 

Summary of Contents for FL-1507B
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands