manualshive.com logo in svg

Avision FL-1507B, User Manual

Share
Download
Avision FL-1507B User Manual Download Page 116

User’s Manual

 

 

 

107 

5.

 

ISIS Interface Operation 

 

 

* Please refer to the preceding chapter, Scanner Installation, to 

install ISIS scanner driver. You may start your ISIS-compliant 

software application to scan via the ISIS user interface. 
The ISIS driver operation method is similar to the TWAIN’s. 

Every function on the ISIS interface screen is briefly described 

as below: 

 

 

 

Mode: Select one of scan modes, including B&W, gray, color 

options. 
Dither: 5 halftone levels available, can be disabled. 
Dots per inch: Select your desired resolution. 
Paper Size: Select your desired paper size. 
Brightness: Adjust your scan image brightness or darkness. 
Contrast: Adjust the range between the darkest and the lightest 

shades in the image. 
Default: Click to reset all settings. 
Area: Select your desired scan area or position. 

 

Summary of Contents for FL-1507B
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands