manualshive.com logo in svg

Avision FL-1507B, User Manual

Share
Download
Avision FL-1507B User Manual Download Page 122

User’s Manual

 

 

 

113 

 

 

MB Application 

Download the MB Application on your mobile device from 

an application store such as Google Play. 

 
 
 
 
 
 
 

7.2

 

Connecting to a wireless network  

7.2.1

 

Connect to a Wi-Fi network in an AP (Access Point) 

mode  

 

In AP (Access Point) mode, your mobile devices and the scanner 

are connected wirelessly without an additional AP (Access Point) 

since the scanner itself works as an AP. 

 

 

1.

 

Press the Wi-Fi button to turn on Wi-Fi. If the connection is 

successful, the blue Wi-Fi LED light will be flashing. 

 
2.

 

On your mobile devices, make sure Avision–xxxx (xxxx 

indicates the last four digits of the Mac Address at the back 

of the scanner) has been selected as your network name 

(SSID). 

 

MB 

Application

 

- AP (Access Point) 

Summary of Contents for FL-1507B
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands