Avision AD8120U User Manual Download Page 86

Page: 86 / 144

User’s Manual

4-54



Multi-Feed Alarm

If a wave file is added, the scanner will make a sound

alarm if multi-feed is detected yet no Warning dialog box

will be displayed.

How to add the sound alarm

：

1. Click the Browse button on the right side of the speaker

icon. The Open dialog box appears.

2. Choose your wave file.
3. Click the Open button. The wave file is added.

Units

Defines the primary measurement system. Inches,

Millimeters, and Pixels are available.

Staple Detection
The Staple Detection feature automatically halts the scanning

process when an unremoved staple is detected. Left

undetected, staples could cause errors that compromise the

document, cause jams, or damage the device.

Summary of Contents for AD8120U

















































































































































Search results

Summary of Contents for AD8120U

Reviews:

Related manuals for AD8120U

Brands by name

Popular brands

Avision AD8120U, User Manual

Search results

Summary of Contents for AD8120U

Reviews:

Related manuals for AD8120U

Brands by name

Popular brands