manualshive.com logo in svg

Avision AD8120U, User Manual, Page: 28 / 144

Share
Download
Avision AD8120U User Manual Download Page 28

User’s Manual

 

 

 

3-9 

 

3.3

 

Verifying Your Scanner Installation   

To verify if your scanner installation is correct, Avision provides 

you a useful test program called Avision Capture Tool.  With this 

tool, you can perform simple scans and view the captured 

images.  In addition, it helps you complete your scan at a rated 

speed. 

 

The following procedure describes how to verify your scanner 

installation.  If the installation is not correct, please review the 

preceding section to check if the cable connection and scanner 

driver have been successfully installed.    
 
Before you begin, be sure the scanner is on. 

 

1.

 

Select Start>Programs>Avision xxx Scanner>Avision 

Capture Tool. The Select Scanner Model dialog box will be 

displayed.  

 

 

2.

 

Select your driver type and scanner model and click OK.  

The following Avision Capture Tool dialog box will be 

displayed. 

Summary of Contents for AD8120U

















































































































































Reviews:

No comments