![background image](http://html1.mh-extra.com/html/avira/antivirus-premium-2012/antivirus-premium-2012_user-manual_3031995105.webp)
Reference: Configuration options
Avira Antivirus Premium - User Manual (Status: 23 Sep. 2011)
105
10.4
Web Protection
The
Web Protection
section under
Configuration > Online protection
is responsible for
the configuration of the Web Protection.
10.4.1
Scan
Web Protection protects you against viruses or malware that reach your computer from
web pages that you load on your web browser from the Internet. The
Scan
options can be
used to set the behavior of the Web Protection component. (Options available in expert
mode only.)
Scan
Enable IPv6 support
If this option is enabled, Internet Protocol version 6 is supported by the Web
Protection.
Drive-by protection
Drive-by protection allows you to make settings to block I-Frames, also known as inline
frames. I-Frames are HTML elements, i.e. elements of Internet pages that delimit an area
of a web page. I-Frames can be used to load and display different web content - usually
other URLs - as independent documents in a sub-window of the browser. I-Frames are
mostly used for banner advertising. In some cases, I-Frames are used to conceal
malware. In these cases the area of the I-Frame is mostly invisible or almost invisible in
the browser. The
Block suspicious I-frames
option allows you to check and block the
loading of I-Frames.
Block suspicious I-frames
If this option is enabled, I-Frames on the web pages you request are scanned
according to certain criteria. If there are suspect I-Frames on a requested web page,
the I-Frame is blocked. An error message is displayed in the I-Frame window.
Action on detection
You can define the actions to be performed by Web Protection when a virus or unwanted
program is detected. (Options available in expert mode only.)
Interactive
If this option is enabled, a dialog box appears when a virus or unwanted program is
detected during an on-demand scan, in which you can choose what is to be done with
the affected file. This option is enabled as the default setting.