The ACC page allows you to control how the recorder communicates with network clients. You can perform any
of the following tasks:
To...
Do this...
Install the Avigilon Control Center Client
software.
Click
Install ACC Client
to download and install the software to the
computer you are using to access the web interface.
Shut down the Avigilon Control Center
Server software.
Click
Stop ACC Services
.
NOTE:
The recorder must be powered to use this feature.
Start up the ACC Server software.
After the ACC Server has shut down, click
Restart ACC Services
.
Format the recorder disk drives.
Click
Reinitialize Storage
to delete all configuration and recorded
video data.
Change the UDP and TCP ports used to
communicate with the ACC Server
software.
In the Service Ports and RTP Ports area, change the Base Port that
is used to access the recorder. Click
Apply
to save your changes.
When the browser displays a pop-up message to ask if you want to
restart the ACC server, click
OK
.
Network
On the Network page, you can change how the recorder connects to the network. The recorder supports two
network connections: one for a corporate network and one for a camera network.
The corporate network is the network that typically provides users with access to the recorder. Users who
monitor video through the Avigilon Control Center Client software would connect to the recorder through this
network.
The camera network is a closed network that typically only contains cameras. This reduces the amount of
interference with video recording.
For more information about the network connections, see
Supported Network Configurations
on page 4.
On the Network page, you can perform any of the following:
To...
Do this...
Change the recorder hostname.
At the top of the page, enter a new name in the
Host Name
field then click
Apply
.
The default hostname is provided in this format:
<Recorder Model>-<Recorder Serial Number>.AVIGILON
e.g. VMA-PRO-4P2-KFO0004731.AVIGILON
Set how the recorder obtains an IP address for
each network.
NOTE:
The Corporate Network Uplink Port and
the Camera network Uplink Port must be on
different subnets.
In the Uplinks area, select one of the following for the LAN:
Corporate and LAN: Camera network connections:
l
Obtain an IP address automatically:
select this option to
connect to the network through an automatically
assigned IP address.
l
Use the following IP address:
select this option to
manually assign a static IP address.
Network
15
