EX5000 Release 8.2.2 Installation Manual
- 50 -
5.8 ADS-B Weather and Traffic (Optional)
The MFD can interface to the Avidyne SkyTrax 100/100B, FreeFlight FDL-978-RX, NGT-9000 or
Garmin GTX-345 ADS-B Receiver with software release 8.2.2 or later.
Note:
The MFD supports interface to either an ADS-B traffic sensor or active traffic sensor (i.e.,
TAS), not both.
5.8.1 SkyTrax100/100B ADS-B Weather Setup
To set up the ADS-B Weather interface of the SkyTrax 100/100B ADS-B Receiver:
1.
From the Maintenance Mode Page, select Aircraft Setup. The Aircraft Setup Page displays:
Figure 16: SkyTrax 100/100B Weather selection on Aircraft Setup Page
2.
Set the following options:
•
Broadcast—
Capstone Radio
•
Port—
Select the MFD RS232 port to which the ADS-B Receiver is wired (Port 1 shown for
example).
•
Baud —
38,400 or 115,200.
3.
When you are done, press
Save
. Press
Cancel
to exit without saving changes.
4.
Changes do not take effect until the MFD has been restarted. From the Maintenance Mode Page,
press
Restart System
.
