EN
14
C - INSTALLATION
•
Using a ruler and spirit level, assemble and attach the remaining rack components to the gate. Once
attached, all components must be perfectly aligned and level.
10mm
level
ruler
3 - INSTALLING THE FLASHING LIGHT
The flashing light must be attached to the top of the post on which the switchgear is mounted, and it must be
visible from both the inside and the outside.
•
With a screwdriver, open the flashing light by unscrewing the 2 screws that hold the upper part of the
flashing light.
•
Attach the flashing light onto the post.
•
Connect a cable of the appropriate length and with a cross-section of at least 0.5mm
2
by passing it through
the cable gland.
•
Replace the upper part of the flashing light, then replace the 2 screws.
CONNECTED MOTOR DRIVE KIT