Avid Technology S4, Installation Manual, Page: 46 / 60

S4 Installation Guide 40
Display Module Test Mode
Display Modules provide a test mode to evaluate display integrity. Test mode can be run on a Display Module while it is connected
to your surface (you do not need to disconnect, unclaim, or power down).
To use Test Mode on a Display Module:
1
Connect a USB keyboard (Windows-compatible recommended) to the USB port on the bottom of the Display Module.
2
On the USB keyboard, press Ctrl + Alt + Shift + V.
An image moves across the screen.
• 4. To exit, press Ctrl + Alt + Shift + V again (or power cycle the Display Module).
Module Specifications
For complete specifications on modules, see the guide for each module (available for download from your Avid account).
The following table lists average and maximum power usage for all S4 and S6 modules. Not all modules are supported on all sys-
tems, as noted.
Power Specifications
* Average power consumption while playing back audio with moderate automation.
Power Consumption
To determine the average power consumption for use in specifying air conditioning and similar, add all the modules’ Average Con-
sumption values.
For Maximum Power Consumption for specifying electrical supply requirements, add the Maximum Consumption values.
Module
Power Requirements
Average Consumption* Maximum Consumption
Automation Module
6 W 18 W
Channel Strip Module
(S4 only)
9.6 W 75.6 W
Display Module
9.6 W 21.6 W
Fader Module (S6 only)
6 W 60 W
Knob Module
6 W 21.6 W
Master Joystick Module
4.8 W 8.4 W
Master Module
36 W 80.4 W
Master Post Module
6 W 9.6
Process Module (S6 only)
3.6 W 15.6 W
Ethernet switch, 16-port
n/a 11.29 W
Ethernet switch, 24-port
n/a 14.83 W