Rack Mounting the Avid Nitris Enclosure
7
The following table describes the electrical specifications for the Avid Nitris editing system.
The following table lists the dimensions of the major hardware components.
Rack Mounting the Avid Nitris Enclosure
This section provides the information for mounting the Avid Nitris in a 19-inch (483-mm)
National Electrical Manufacturers Association (NEMA) or Electronics Industries
Association (EIA) rack. Avid recommends that you mount your Avid Nitris in a rack before
you connect any cables.
n
If you need to rack mount the HP workstation, a rack-mount kit is available from HP.
Installation instructions are included with the kit. The HP Workstation system requires 5
rack units.
See the following sections for more information:
•
Equipment Environmental and Safety Guidelines
•
Installing the Avid Nitris in a Rack
Electrical Specifications
Component
Voltage
Frequency
HP Workstation xw8200
100 to 240 V ac auto-ranging
50 to 60 Hz
Avid Nitris
100 to 240 V ac
50 to 60 Hz
Avid MediaDock Ultra320 storage systems
90 to 264 V ac
50 to 60 Hz
Hardware Component Dimensions
Hardware component
Dimensions
(Inches)
Dimensions
(Centimeters)
HP Workstation xw8200
Rackmount configuration — Rack Units: 5
Height: 17.9
Depth: 20.7
Width: 8.3
Height: 45.4
Depth: 52.5
Width: 21.0
Avid Nitris
Rackmount configuration — Rack Units: 3
Height: 5.3
Width: 17.6
Depth: 13
Height: 13.5
Width: 44.7
Depth: 33.02
Summary of Contents for Nitris
Page 58: ...58...
