Avid Technology Nitris, Using Manual

Page: 34 / 58

34
7. Plug one end of a BNC sync cable into the Avid Nitris SD sync or HD tri-level input and
the other into the reference signal.
Connecting Video Devices
Connecting a Video Deck — Component Signal
A component video deck connection requires the following:
• Two component video cables with three BNC connectors at both ends
• A video deck with component inputs and outputs
To connect a deck using component signals:
1. Locate one component video cable.
The cables used in the following example have three BNC connectors on each end of the
cable and are color coded (red, green, and blue).
1 2 3 4 5 6 7 8
HD SDI IN HD SDI OUT
ANALOG AUDIO IN
ANALOG IN ANALOG OUT SDI DAE LTC
SYSTEM
ANALOG AUDIO OUT
HD MONITOR OUT
MONIT
OR OUT
DIGITAL AUDIO
Y PB
S/P DIF
PR
Y SD SYNC PB PR Y PB PR
HD TRILEVEL
SYNC
OUT 1
MIC 1 MIC 2
OUT 2
GAIN
1 2 3 4 5 6 7 8
GAIN
IN
IN
IN OUT
CV 1
CV 2
OUT
OUT 1
OUT 2 OUT 2
1
IN
IN/OUT
CV S-VIDEO
S-VIDEO
NITRIS HD
HD COMPONENT OUT
OPTICAL
AES/EBU
Avid Nitris
Video
monitor
RS-232 to
RS-422
adapter
RS-232 cable serial port
Digital VTR
Digital interlink cable
RS-422 cable
to VTR
Reference
signal