38
3. Attach the other end of the serial digital cable to serial digital output on the video deck.
4. Locate another serial digital cable and attach it to the SDI OUT on the Avid Nitris SD
video I/O board or HD SDI OUT on the HD video I/O Board (see the previous figures).
You can use either SDI OUT connectors on the two boards.
5. Attach the other end of the serial digital cable to the serial digital input on the video
deck.
n
Make sure you terminate the input signal if your video deck supports passthrough. See the
documentation that is provided with your video deck.
Connecting a Video Deck — S-Video Signal
There are two industry-standard S-Video connectors on the rear of the Avid Nitris. One
connector is for video input, and the other is for video output. A composite video deck
connection requires the following:
•
Two S-Video cables
•
A video deck with S-Video inputs and outputs
To connect a deck using S-Video signals:
1. Locate one S-Video cable.
2. Attach one end of the cable to the Avid Nitris S-Video IN connector on the SD video I/O
board.
3. Attach the other end of the S-Video cable to S-Video output on the video deck.
4. Locate another S-Video cable and attach it to the S-Video OUT connector on the Avid
Nitris SD video I/O board (see the previous figure).
5. Attach the other end of the S-Video cable to the S-Video input on the video deck.
1
2
3
4
5
6
7
8
HD SDI IN
HD SDI OUT
ANALOG AUDIO IN
ANALOG IN
ANALOG OUT
SDI
DAE
LTC
SYSTEM
ANALOG AUDIO OUT
HD MONITOR OUT
MONIT
OR OUT
DIGITAL AUDIO
Y
PB
S/P DIF
PR
Y
SD SYNC
PB
PR
Y
PB
PR
HD TRILEVEL
SYNC
OUT 1
MIC 1
MIC 2
OUT 2
GAIN
1
2
3
4
5
6
7
8
GAIN
IN
IN
IN
OUT
CV 1
CV 2
OUT
OUT 1
OUT 2
OUT
2
1
IN
IN/OUT
CV S-VIDEO
S-VIDEO
NITRIS HD
HD COMPONENT OUT
OPTICAL
AES/EBU
S-Video input
S-Video output
Summary of Contents for Nitris
Page 58: ...58...
