AVIATION DESIGN
- ZI le Chenet - 91490 MILLY LA FORET – FRANCE - Tel : int+ 33 1 64 98 93 93 - [email protected] – www.adjets.com
5
Gear :
Please, use only the oleo legs supply by Aviation Design.
If you use standard oleo, you will have to modify the gear position and gear door position
Fit the main gear on the plywood mount a drill four 2 mm hole
Screw each gear with four 3x20 mm parker screws
Fit the front gear on the plywood mount a drill 4 x 2 mm
hole
Screw the front gear with four 3x20 mm parker screws
Screw the steering servo on the plywood frame
Connect servo to steering arm with 2 mm link + steel wire