AVIATION DESIGN
- ZI le Chenet - 91490 MILLY LA FORET – FRANCE - Tel : int+ 33 1 64 98 93 93 - [email protected] – www.adjets.com
11
Engine installation :
The engine must be screw with 4 times 3x20 mm parker screw to the rear position.
A plywood reinforcement is already glued inside the fuselage
Make all necessary hole in the fuselage for electric wire and fuel tubing in front of the engine
ECU installation :
Fit the ECU in one side of the plane.
Fit the fuel pump and valves just rear to the ECU and hold them with T rap.