AVIATION DESIGN
- ZI le Chenet - 91490 MILLY LA FORET – FRANCE - Tel : int+ 33 1 64 98 93 93 - [email protected] – www.adjets.com
6
Stab servos :
Increase the hole for the servo location in the stab with a permagrit rotating tool
Screw the servo in the servo cover (you can also glue it with silicon glue for more security)
Put in place the servo cover on the stab
Drill 4 x 1 mm hole in the stab for the screws
Make a 10 mm hole in on side of the stab for the servo connector
Cut a slot in the control
surface for the fiber control
horn
Glue with fast epoxy the
control horn
Connect two 3 mm link with M3 threaded rod
Screw the servo cover with the 4 parker screws
Connect the servo with the control horn
Apply thread lock.
