AVG-UHMS88
3. Product Appearance of the AVG-UHMS88
3.1 Front Panel
No.
Name
Description
①
Firmware
Micro USB port for updating firmware
②
Power Indicator
Illuminates red when power is on
Illuminates yellow in standby mode
③
IR
In-built IR sensor, receives IR signals sent from IR remote.
④
LCD Screen
Display real-time operation status.
⑤
INPUTS/
Menu
buttons
Normal mode: Back-lit buttons, ranging from "1" to "8".
Query mode (buttons 1~4): Press “ENTER” for more than 3 seconds to enter
this mode. Dial
to select different menus,
to select different
options.
⑥
OUTPUTS
buttons/
EDID
Management
buttons
Normal mode: Back-lit buttons, ranging from "1" to "8". Outputs 1~4 support
synchronous local HDMI output.
EDID Invoking mode: press and hold EDID button for 3 seconds or more to
enter this mode, buttons 1~6 correspond to the 6 embedded EDID data
separately. Press any of the 6 buttons to invoke embedded EDID data.
⑦
Function buttons
ALL: Select all inputs/ outputs
Example: To transfer both AV and IR signals from input channel No.1 to all
output channels.
Operation: Press buttons in this order: “1”, “ALL”, “ENTER”
EDID management button: Enable input port to manually capture and learn
the EDID data of output devices.
Example: Input channel No.2 captures and learns the EDID data of output
channel No.4
Operation: Press buttons in this order: “EDID”, “2”, “4”, “ENTER”
CLEAR:
Withdraw an operation like switching output channel, learning EDID
data before it comes into effect. Meanwhile, the matrix will return to the
previous status.
ENTER: Confirm operation. Press and hold it for 3 seconds to enter in Inquiry
mode.
Notes: Pictures shown in this manual are for reference only.
