AVG-UHMS88
Output Button
EDID Data
1
1080P 3D 2CH
2
1080P 3D Multichannel
3
1080P 2D 2CH
4
1080P 2D Multichannel
5
3840x2160 2D
（
30Hz
）
6
4096x2160 2D
（
30Hz
）
Format: Press and hold “EDID” for 3 seconds, ““O“ENTER”.
Operations:
Set EDID data for one input
Operation: Press “EDID” (hold for 3 seconds to enter in EDID setting status), ““O“ENTER”.
Example: Set the EDID data of INPUT 4 to the forth type of embedded EDID data:
Press
(hold for 3 seconds)
.
Set EDID data for all inputs
Operation: Press “EDID” (hold for 3 seconds to enter in EDID setting status), “ALL”+“O“ENTER”.
Example: Set the EDID data of all input ports to the second type of EDID data:
Press
(hold for three seconds)
.
Note:
If the conversion is successful, indicators of the pressed buttons will blink green for three times at normal
speed; if the conversion failed, they will blink for three times
quickly.
5.1.3 Query
Check status
Press and hold the button “ENTER” for 3 seconds, it will enter into system inquiry menu. Use Left and Right
direction button to navigate checking the previous/next items.
Function Items
Example
Description
Check the connection
status of inputs
Y means the corresponding port is
connected with input device, N means not.
Check the connection
status of outputs
Y means the corresponding port is
connected with output device, N means not.
Correspondence
between inputs and
outputs
Shows the correspondence between the 8
inputs and 8 outputs.
Check if the input is
with HDCP
Y means the input signal is with HDCP, N
means not.
Check if the output is
with HDCP
Y means the output signal is with HDCP, N
means not.
Check the output
resolution
Use button
to check the 8 output
resolutions separately.
Output check
Press any output button to check its corresponding input.
Example: Check which one is the corresponding input for output 2. (Presume Output 2 corresponds to Input 1.)
Operation: Press Output 2 button, LCD screen display “AV: 1->2 IR: 1->2”, and indicators of input 1 and output 2
