AVG-UHMS88
5. System Operations
5.1 Front Panel Button Control
The operation examples are showed in 2.1 Front Panel. Here we make a brief introduction to the system
operations.
5.1.1 Switching I/O connection
1) To select one input to an output:
Operation: “input”+““ENTER”
Example: input 1 to output 2
Note: In default status, 8 IR OUT sockets correspond with 8 HDMI INPUTS. When you route a HDMI input to an
output, the corresponding IR OUT will be switched synchronously.
2) To select an input to several outputs:
Operation: “input” + “output” + “output” +… + “ENTER”
Example: Switch input 2 to output 2, 4
3) To select input to all outputs:
Operation: “input” + “ALL” + “ENTER”
Example: Select input 1 to all outputs
Note:
Indicators of the pressed buttons will blink green for three times if the conversion is done, then it will be off.
If the conversion failed, they will be off immediately.
5.1.2 EDID Management
AVG-UHMS88 features EDID management to maintain compatibility between all devices. It can be controlled via
EDID learning and EDID invoking.
EDID Learning (from output):
One input port learns the EDID data of one output port
Operation: Press “EDID”, ““O“ENTER”.
Example: Input 2 learns EDID data from output 4
All input ports learn EDID data from one output port
Operation: Press “EDID”, “ALL”+“O“ENTER”
Example: All input ports learn EDID data from output 4
Note:
Indicators of the pressed buttons will blink green for three times if the conversion is done, then it will be off.
If the conversion failed, they will be off immediately.
EDID invoking:
There are six types of embedded EDID data. The chart below illustrates the detailed information of the embedded
EDID data:
