AVG-UHMS88
3) IR control setting
Controlling a far-end output device from local point
Connect an IR receiver with IR carrier to the IR IN port of AVG-UHMS88, users can control far-end output
displayer via its IR remote from local.
In that case, the IR signal is transferred via twisted pair. Only the corresponding IR OUT port can emit control
signals to the remote display.
See the figure below:
Control far-end device from Local
Note: The IR receiver connected to IR IN must have an IR carrier
The IR signal received from IR ALL IN port will be transmitted to all the eight far-end HDBaseT receivers
connected to HDBaseT ports of the AVG-UHMS88. See as below:
Control far-end device through IR ALL IN port