AVG-FMM12
5. System Operation
5.1. Front Panel Button Control
The AVG-FMM12 provides convenient front panel button control for I/O switching,
EDID management, and system query. Here is a brief introduction to the operations.
5.1.1. Switching I/O connection
Input/output channels are recognized as double-digits, press 01~09 for channel 1~9.
1.
To switch one input to an output:
Operation: “INPUT”+““ENTER”
Example: Switch input 01 to output 12:
+
+
2.
To switch an input to several outputs:
Operation: “INPUT” + “OUTPUT” + “OUTPUT” +… + “ENTER”
Example: Switch input 2 to output 2 and 4
+
+
3.
To switch an input to all outputs:
Operation: “input” + “ALL” + “ENTER”
Example: Switch input 02 to all outputs
+
+
Note:
Indicators of the pressed buttons will blink green for three times if the switch is
done, then it will turn off. If the switch failed, they will turn off immediately.
Summary of Contents for AVG-FMM12
Page 46: ...AVG FMM12 7 Panel Drawing ...
