AVG-FMM12
5.1.4. Clear Operation
Function: clear the previous operations before pressing
ENTER
to enforce it. Pressing
CLEAR
can only erase the operations not confirmed by pressing
ENTER
.
Note:
1.
Input/output channels are recognized as double-digit, press 01~09 instead of 1~9.
2.
The input delay time between two numbers of every input & output channel must be
less than 8 seconds; otherwise the operation will be cancelled.
3. The input/output channels on the rear panel are counting from left to right no
matter whether there is signal card or not.
5.2. IR Control
Connect an IR receiver to
the IR EYE
on the rear panel, users can control the switcher
with the included IR remote (shown as below):
No.
Button
Function
①
Standby button
Press it to enter/exit standby mode
②
Input channels
Input selection buttons, channels 1~9
should be selected as 01~09
③
Function buttons
Share the same operation as the front
panel buttons
④
Enter
Confirm operation
Long-press (3 seconds or more) to
enter query mode
Note:
navigation buttons are
unavailable.
⑤
Output channels
Output selection buttons, channels
1~9 should be selected as 01~09
Summary of Contents for AVG-FMM12
Page 46: ...AVG FMM12 7 Panel Drawing ...
