Avery Weigh-Tronix WI-125 SST, Service Manual

Page: 29 / 52

29
WI-125 SST Indicator Service Manual
If SETUP, ADJUST, or DATA appears and it is flashing, the indicator is
telling you that it is corrupted and must be reset to default values.
If ALL appears, you have the option to reset all values to their default
settings simultaneously.
If ALL is flashing, the indicator is telling you that SETUP, ADJUST , and
DATA are all corrupted and you must reset them all to default values.
If you choose ALL , the unit returns automatically to weighing mode. All
factory defaults are now in place, including calibration values .
To reset any of the choices, use the MENU key to toggle between the
choices. When the correct choice is displayed, press SELECT , then press
G/N to save.
If you choose to reset some choices, but not all, the unit will return to
weighing mode when you press
G/N . If nothing is corrupted (no choices are
flashing) you can return to weighing mode by pressing SELECT while END
(after RESET ) is displayed.
Reset Menu
Instructions for moving
around within the
Configuration Menu