Avery Weigh-Tronix WI-125 SST, Service Manual

Page: 28 / 52

28
WI-125 SST Indicator Service Manual
Master Clear Menu
If SETUP, ADJUST, or DATA are set to defaults, they will not appear in the
menu.
If SETUP , ADJUST , or DATA appear, you have the option to reset one, two,
or all three of them to default values.
ALL - Includes Setup,
Adjust, and Data
SET UP - Configuration
selections
ADJUST - Calibration settings
DATA -
User entered
information
Do not reset anything unless it
is absolutely necessary. If you
reset ADJUST, this may mean
you have to bring in a weight
truck to re-calibrate your
system.
If the indicator's memory, calibration or other data becomes corrupted, a
reset menu will become active.
RESET will be displayed telling you there
has been a problem. You may also choose to perform a Master Clear to
reset the setup, adjust or data values to default values. Performing a master
clear gives you access to the first reset menu shown below. If the indicator
found a problem with itself, you will see the second menu. In either case,
you must turn switch S1-1 on before you can reset setup or adjust items.
NOTE: The only items active for a reset or master clear are those items that
are not set to the factory defaults.
To perform a master clear follow these steps:
1. Turn the unit off, hold the TARE
and ZERO keys down as you
turn on the unit. . . CODE NO. is displayed.
2. Press SELECT . . . __ is displayed.
3. Key in your security code
number, then press SELECT . . . CODE NO. is displayed.
You must enter the security code
number before you can reset any
items.
4. Press MENU . . . RESET is displayed. From here you
access the rest of the menu items
the same as you do for all the other
menus.
Reset Menu and Master Clear