Avery Dennison Monarch 9460 SNP, System Administrator Manual

Page: 28 / 76

3-4 System Administrator’s Guide
Notes :

The configuration for HP Distributed Print Services and for earlier versions of HP/UX
is slightly different.

The print server can also be configured as a JetDirect card using HP/UX. To do this,
you will need the HP UNIX Host Printing Software (part of HP's JetAdmin for UNIX).
I B M A I X C o n f i g u r a t i o n
To configure a print server on IBM AIX 4.x, use the SMIT program as follows:
1.
Enter SMIT and select Devices .
2.
Select Printer/plotter.
3.
Select Manage remote printer subsystem.
4.
Select Client services.
5.
Select Remote printer queues.
6.
Select Add a remote queue . Enter the following remote queue settings:

Name of queue to add (user selectable) Activate the queue (Yes).

Destination host (print server’s IP address; or if you have configured the /etc/hosts
file, use the name of the print server that you specified in that file).

Name of queue on remote printer BINARY_P1 for binary files or TEXT_P1 for text
files).

Name of device to add (user selectable; for example lp0).
7.
You should now be able to print using the normal lp -d command.
Note: The configuration for earlier versions of AIX is slightly different.
The print server can also be configured as a JetDirect card using AIX. To do
this, refer to your AIX documentation.
C o n f i g u r a t i o n o n O t h e r S y s t e m s
The print server can be used with any computer system that supports the LPR/LPD
protocol or HP JetDirect (port 9100 is the default; however, it can be reconfigured). Refer
to the system’s documentation to configure LPR/LPD or JetDirect print queues.