Avery Dennison Monarch 9460 SNP, System Administrator Manual

Page: 14 / 76

2-6 System Administrator’s Guide
Configuring the Printer
The Configure menu allows you to set the printer’s IP address, subnet mask, gateway,
power mode, protocol, SSID, and escape character.
To exit, press
F
at any time.
Setting the IP Address
This option sets the printer’s IP address.
1. From the RF Network menu, select Configure.
2.
From the Configure menu, select IP Address .
IP Address
192.0.0.192
E R
+
For: Select:
BOOTP 0.0.0.0
DHCP 0.0.0.1
Static IP
nnn.nnn.nnn.nnn
Use the
A
buttons as shown in the following table:
E
Press
A
to
R
Press
A
to
+
Press
A
to
Saves the setting Scrolls through the positions
from left to right Increments the current
position setting by 1
1.
When the setting you want is displayed, press
E
to save the setting. You return to the
Configure menu.
Setting the Subnet Mask
This option sets the printer’s subnet mask.
1.
From the Configure menu, select Subnet Mask .
Subnet Mask
255.255.000.000
E R
+
Use
A
as shown in the following table:
E
Press
A
to
R
Press
A
to
+
Press
A
to
Saves the setting Scrolls through the positions
from left to right Increments the current
position setting by 1
2.
When the setting you want is displayed, press
E
to save the setting. You return to the
Configure menu.