Avery Dennison Monarch 2, Programmer'S Manual

Page: 28 / 234

C o n f i g u r a t i o n S y n t a x G u i d e l i n e s
When creating a printer configuration packet:
N
Follow the "Standard Syntax Guidelines" listed at the
beginning of this chapter.
N
Begin a packet with the configuration header (
I
).
N
Download multiple configuration packets within one packet or
download a single configuration packet.
N
Include the first five ANSI codes, at a minimum, in the control
characters packet.
N
If you change any of the online configuration packets, resend
the format packet to the printer, so the configuration changes
take effect.
N
Make sure the communication settings at the host match those
at the printer.
M a k i n g P r i n t A d j u s t m e n t s
You can adjust where the printer prints on your supply by
adjusting the supply, print, or margin positions. However, keep in
mind the following:
N
Supply adjustments across the width of your supply, such as
the margin position, are based in dots. The printhead has 203
dots per inch.
N
Supply adjustments for the length of your supply, such as
supply position or print adjustment, are measured in 1/203 of
an inch.
2-8 Configuring the Printer