Avery Dennison Monarch 2, Programmer'S Manual

Page: 15 / 234

7.
Create a format packet, based on how you filled out your
worksheet. See Chapter 3, "Defining Fields," for more
information.
D e t e r m i n i n g F o r m a t C o n t e n t s
Before you lay out your format, you need to make a few decisions.
For example:
N
How large is your supply?
N
Which fonts do you want to use?
N
Do you want to include a bar code?
N
Do you want to include graphics?
D e t e r m i n i n g t h e P r i n t A r e a
The print area varies, depending on the size of your supply. Below
are the maximum and minimum print areas. Notice that the top
edge of the supply exits the printer first. There is a non-print zone
(0.055 inches) on either edge of the supply.
Unit of
Measure
Maximum
Supply Size
Maximum
Print Area
Minimum
Supply Size
Minimum
Print Area
English
(1/100") 205 x 1200 189 x 1200 50 x 37.5 37.5 x 37.5
Metric
(1/10mm) 521 x 3048 480 x 3048 127 x 95 95 x 95
Dots
(1/203 dots) 416 x 2436 384 x 2436 102 x 76 76 x 76
The length you can print is dependent on the amount of memory
you allocate for the image buffer. See "Defining the Memory
Configuration Packet" in Chapter 2.
For exact print area measurements of your
supply, see the supply layout grids in
Appendix D.
Getting Started 1-5