Avery Dennison Monarch 2, Programmer'S Manual

Page: 30 / 234

Example
{
I
,A,0,0,0,1,0
p
}
Powers up the printer in the online mode, displays prompts in
English, does not print a separator after each batch, prints zeros
with slashes through them, and uses the internal symbol set.
D e f i n i n g t h e S u p p l y S e t u p P a c k e t
Use the supply setup packet (B) to select supply type, ribbon,
feed mode, supply position, and cut position.
Syntax
{
I
,B,supply_type,ph_energy,feed_mode,
supply_posn
p
}
B1. B Supply Setup Packet
B2. supply_type Supply Type. Options:
0 Black mark supply
1 Die Cut supply (default)
2 Non-indexed supply
Note: You must use non-indexed supply in continuous
mode. Also, you may need to adjust the print
contrast (in the Print Control packet), based on the
type of supply you are using.
B3. ph_energy
0 Standard Supplies
1 Special (fax paper)
2 High Energy (linerless and synthetic)
Note: Monarch does not recommend that you print serial
bar codes with linerless supplies.
B4. feed_mode Feed Mode. Options:
0 Continuous operation (default)
1 On-demand mode (purchase optional)
2-10 Configuring the Printer