Avery Dennison ALS 306, Installation Manual, Page: 26 / 56

26
2 I
NSTALLATION
2.2 U
NPACKING
,
ASSEMBLING AND CONNECTING THE MACHINE
ALS
306
309
Installing short dispensing edge holder
For mounting angle > 0°, an additional deflection roller
has to be mounted:
Article number deflection roller:
– A9724 for ALS 306
– A9808 for ALS 309

Swivel the dispensing edge holder to the required
angle and screw it to mounting point [36A].
– The screw can be reached through the hole in the
top cross beam [37].

Close the hole using the plastic cap.
Mounting angle > 0°:

Remove the AUM, see chapter “Removing the
AUM” on page 198.

Remove the cap from hole [36B].

Push the deflection roller axle into the hole [36B]
and fix it with a screw from the opposite side.

Remount the AUM.
[39] Short dispensing edge holder swivelled 45°.
[36] Mounting points:
A Mounting hole for short dispensing edge holder
B Mounting hole for deviation roller
[37] Fixing the dispensing edge holder.
[38] Short dispensing edge holder in 90°-position
A
B