Avery Dennison ALS 306, Installation Manual, Page: 20 / 56

20
2 I
NSTALLATION
2.2 U
NPACKING
,
ASSEMBLING AND CONNECTING THE MACHINE
ALS
306
309
Holding machines in place with the
adjustable head joint
By means of the adjustable head joint, the labeller can
be easily inclined by an angle of ±4° by a single opera-
tor.
[21] Inclination range with the adjustable head joint.
Article number of the adjustable head joint assy. [17]
(including screw and cylinder pins): A9773.
The adjustable head joint comes as two preas-
sembled brackets [19][22]. The complete as-
sembly is done while mounting the parts to the
labeller.
[22] State of delivery of the head joint brackets.
Tools:
– 6/10/17 mm hexagon socket drivers
– Plastic hammer

Remove the cover plug [18A] from the flange [18B]
on the labellers rear side.

Locate the two cylinder pins [20A] in the holes in the
machine side bracket [19B].

Screw the machine side bracket [20B]
onto the
flange on the rear side of the machine with the
screw
[20C]
provided.
– The two cylinder pins
[20A]
must locate into the ho-
les
in the flange.
Tightening torque:
– Mounting screw[20C] . . . . . . . . . . . . . . . . . .
(DIN EN ISO 4762 M20x40 8.8) . . . 350 Nm
[17] Adjustable head joint, assembled
[18] Cover plug (A) at the mounting flange.
[19] Preassembled brackets of the head joint (state of delivery)
A Support stand side bracket
B Machine side bracket
[20] Assembling the machine side bracket (B).
A
B
A
B
A
B
C
max. 4°
max. 4°