Avery Dennison ALS 306, Installation Manual, Page: 19 / 56

19
2 I
NSTALLATION
2.2 U
NPACKING
,
ASSEMBLING AND CONNECTING THE MACHINE
ALS
306
309
2.2.2
Setting up
WARNING!
Risk of injury from a tipping over support
stand.

When installing the machine on a support
stand, make sure that it can not tip over.

Fix the support stand onto the ground.
Prerequisites:
Support stand with a tube end providing the following
measures:
– Outer diameter: 60 mm
– Wall thickness: minimum 5 mm
Holding machines in place with the fixing
bolt
– Article number for fixing bolt assembly [15A] (inclu-
ding screw and cylinder pins): A7621
Tools:
– 6/10/17 mm hexagon socket drivers

Remove the cover plug [14A] from the flange [14B]
on the labellers rear side.

Locate the two cylinder pins [15B] in the holes in the
fixing bolt [15A].

Screw the fixing bolt [16A] onto the flange on
the rear side of the machine with the screw
[16B] provided.
– The two cylinder pins
[16C]
must locate into the ho-
les
in the flange.
– Mount the fixing bolt with its bevelled side pointing
inwards towards the machine.
Tightening torque:
– Fixing bolt screw
[16B]
(DIN EN ISO 4762
M20x40 8.8). . . . . . . . . . . . . . . . . . . 350 Nm
[14] Cover plug (A) at the mounting flange.
[15] Fixing bolt (A) for clamping the machine from the rear side.
The cylinder pins (B) prevent rotation of the fixing bolt.
[16] Mounting the fixing bolt.
A
B
A
B
A
B
C