Avery Berkel XS 100 Operator Instructions Manual Download

Page: 28 / 53

Print the receipt or label.

Remove the container with the product from the scale. The tare is automatically cancelled. If it does not cancel,

press

Note:

The weight display must be at zero before you start.

Using preprogrammed tare keys

Your machine may be programmed with dedicated tare key that selects a previously programmed tare weight value.

If your machine has dedicated tare keys you can use these to select the appropriate tare for the container you are using
instead of using the numeric keys to enter the container weight.

Tare interlock (label mode only)

In label mode, if the tare interlock has been enabled, you can only print a label if you have selected a tare. It operates in
one of two ways

Enabled

The manually selected a tare can be overridden by a PLU with a stored tare. The stored tare overrides the manually
selected tare.

Enab. & Fix Tare

A manually selected tare cannot be overridden by a stored tare. You will see the message

Tare Operating

and the new

tare will be cancelled.

Note:

This only applies to manually selected tares. If a PLU with a stored tare is displayed and another PLU with a stored

tare is selected, the interlock does not operate.

4.11

Using the FIX key

Use the FIX function to:

•

retain the PLU after the item has been removed from the scale.

•

retain a tare until it is cancelled

•

retain the PLU until it is cancelled (Label mode)

•

retain the unit price of hand priced products after the item has been removed from the scale.

Note:

If your machine is configured only to retain the tare, the PLU will not be retained.

4.12

Using the ADD key

Note:

This function is only available if your machine is operating in label mode.

Pressing

ADD

enables you to obtain a label with totals printed on it.

There are four types of add label available depending on how your machine has been configured:

•

single add label at the end of all the transactions

•

label after each transaction and a single add label at the end of all the transactions

•

a receipt type label at the end of all transactions

•

label after each transaction and a receipt type add label at the end of all the transactions.

Please Note:

•

ADD

is not available if the machine is set to receipt mode.

•

You must press

while the subtotal is displayed to print a label or ADD receipt.

To print an ADD label:

Press

ADD

. Display shows

Add PLU

Summary of Contents for XS 100






















































Search results

Summary of Contents for XS 100

Reviews:

Related manuals for XS 100

Brands by name

Popular brands

Avery Berkel XS 100, Operator Instructions Manual

Search results

Summary of Contents for XS 100

Reviews:

Related manuals for XS 100

Brands by name

Popular brands