•
You can cancel (void) any item in the subtotal.
•
If security is set for the void function, the void operation can only be initiated by an operator or supervisor with an
equivalent or higher security level.
To void all transactions:
1.
Press
.
2.
Press the Operator Key. The scale shows the subtotal.
3.
Press
.
To void individual transactions:
1.
Press
.
2.
Press the Operator Key. The scale shows the subtotal.
3.
Or use the
keys to select the individual item to void.
4.
Press
. The screen shows the transaction with a line through it.
5.
Continue to void other items, or press
to return to normal operation.
6.
When ready, print the receipt (or add label) in the usual way. The scale prints the receipt with the voided items
subtracted from the total.
4.10
Using tares
A tare is the weight of a container, which is not to be added to the weight of the product, and therefore only applies to
weighed goods.
To Apply a Tare
1.
Place the container on the scale.
2.
Press
. The weight of the tare is shown below the weight of the product (if configured for separate tare).
3.
Fill the container either on or off the scale.
4.
Select the PLU (weighed products only).
5.
Print the receipt or label.
6.
Remove the container with the product from the scale. The tare is automatically cancelled. If it does not cancel,
press
.
Note:
to keep the PLU (and tare in Label mode) active, use the fix key.
The types of tare available for you to use depend on local trading regulations and how your machine has been
configured.
Free (semi-automatic), cumulative and keyboard entered tares cancel when the load is removed from the weigh plate.
Keyboard entered tare
If you are using a container with a known weight you can use the numeric keys to enter the weight.
To use a keyboard entered tare:
1.
Press
.
2.
Enter the weight of the container.
3.
Fill the container either on or off the scale.
4.
With the container on the scale, select the PLU (weighed products only).
