Avery Berkel TB Series, User Instructions

Page: 21 / 24

10 Cleaning
19
User Instructions for TB/TC Series Balances
10 Cleaning
To simplify cleaning remove the large screw in the centre of the
plate and lift off the pan support plate. When replacing the plate
ensure the locating peg aligns with the corresponding hole.
The balance exterior and fitting may be wiped clean with a soft
cloth moistened with water or a dilute soap or detergent solution.
Scouring cleaners, alkali cleaning solutions such as washing
soda, or solvents should not be used.
11 Mains fuse
WARNING
TO AVOID THE POSSIBILITY OF ELECTRIC SHOCK
OR DAMAGE TO THE MACHINE, ALWAYS SWITCH
OFF THE MACHINE AND ISOLATE FROM THE
POWER SUPPLY BEFORE CARRYING OUT ANY
ROUTINE MAINTENANCE.
The mains input fuse is situated at the rear of the balance and is
located behind a small plastic cover immediately beside the mains
input socket. Prise out the cover with a small screwdriver or
similar tool. A spare fuse is mounted in the cover. Replace as
follows:
Mains supply Fuse Rating
110–120V 20mm, 500mA Anti–Surge Type
220–240V 20mm, 250mA Anti–Surge Type
Caution:
You must use the same type of fuse. If in doubt contact
your Avery Berkel centre.