Avery Berkel TB Series, User Instructions

Page: 15 / 24

6 Counting
13
User Instructions for TB/TC Series Balances
6 Counting
You can use the balance to determine the number of identical
components in a batch by first carrying out a sample weighing
operation.
If the balance is linked to a peripheral such as a tally roll printer
you can obtain a printed record.
Notes
The balance will not sample if the display shows the under weight
lower bars or over weight upper bars.
To count a different component repeat the counting procedure.
1. Either
Ensure that the pan is empty and the display shows zero.
Or
Place an empty container on the pan.
Press
T
to zero the weight display.
2. Place a number of components on the balance pan.
These components are called the sample size. The sample
size can comprise 5 – 50 components in steps of 5.
3. Press and hold until the display shows the
required sample size.
The display shows SPLE followed by the sample sizes in
steps of 5. This is the number of components you intend to
use in the initial sample. The scrolling sequence always
starts at the last selected sample size. When you release
the key the display shows the sample size and a small c in
the top right hand corner of the display to designate count is
in operation.
4. Add further components.
The display automatically increments accordingly.