background image

Avenview Warranty Certificate

AVENVIEW CORP. (“Avenview”)  warrants  Avenview-branded  product(s)  contained in the original packaging  against defects in materials and workmanship when used 
normally in accordance with Avenview's enclosed manual guidelines for a period of THREE (3) YEARS from the date of original retail purchase - Warranty Period.  Avenview’s 

published guidelines include but are not limited to information contained in technical specifications, user manuals and service communications. 

LABOR: During the Warranty Period of THREE (3) YEARS, Avenview will repair or replace the product(s) at no cost using new or used parts equivalent to novel performance 

and reliability if the product(s) is determined to have abide by Avenview’s published guidelines.  Cost of Labor applicable to product(s) after Warranty Period.  For labor costs, 
please contact 

[email protected]

PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if 
the product(s) is determined to have abide by Avenview’s published guidelines.  Cost of Parts applicable to product(s) after Warranty Period.  For part(s) costs, please contact 

[email protected]

To obtain Warranty: (a) 

proof of purchase in the form of a bill of sale or receipted invoice reflecting that the registered product(s) is within warranty period must be presented 

to obtain warranty service; (b) 

 product(s) must be registered at time of purchase.  

Failure to do so will result in applicable parts and labor charges.  Returning product(s) must 

be shipped in Avenview’s original packaging or in packaging pertaining equal degree of protection to Avenview’s.  Both Avenview and purchaser are responsible for freight 
charges and brokerages when shipping the product(s) to the receiver.  

 

NOT COVERED BY THIS WARRANTY 

This warranty does not apply to any non-Avenview branded product(s); non-registered Avenview product(s). This warranty does not apply: (a) to cosmetic damage, including 
but not limited to scratches, dents and broken cords; (b) to damage caused by use with another product; (c) to damage caused by accident, abuse, misuse, liquid contact, fire, 
earthquake or other external cause; (d) to damage caused by operating the Avenview product(s) outside Avenview’s manuals or guidelines; (e) to damage caused by service 
performed by anyone who is not a representative of Avenview or an Avenview authorized personnel; (f) to defects caused by normal wear and tear or otherwise due to the 
normal aging of the Avenview product(s), or (g) if any serial number has been removed or defaced from the Avenview product(s). 

AVENVIEW IS NOT LIABLE 

FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR 

CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR 
ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS; 

LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATION; LOSS OF, DAMAGE TO, COMPROMISE OR CORRUPTION OF DATA; OR ANY INDIRECT 
OR CONSEQUENTIAL LOSS OR DAMAGE 

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. 

Some states do not allow the inclusion or limitation of incidental or consequential damages, or allow limitations on duration implements of the Warranty Period; therefore the above limitations or 

exclusions may not be applicable to you.  This warranty gives you specific legal rights, and you may have other rights which vary from state to state. 

1100 Military Road, Kenmore, NY 14217 

1.866.508.0269 

www.avenview.com

Page

55

Summary of Contents for MLT-EDGEPRO-2X2


























































Reviews: