3
.
5
OSD
M
enu and Operation
www.avenview.com
Page
20
[Input Signal] - Selection
The
DVI
port is (
DualLink DVI
)
design.
The connection signal can be DVI-D, HDMI (HDMI to DVI adapter is
required) and DualLink DVI.
•
[Input] hotkey on
the
front panel
also
change
s the
input port.
See the caption on the left
•
Another method is using the
IR remote
controller.
T
o apply DualLink DVI for high resolution signal (up to 4
K
@30Hz), user needs to enable
DualLink DVI
function through Factory Setting mode. Please contact us for more details.
When DualLink DVI function is enabled,
the
HDMI input will have no audio and 3D signal can’t pass through.
The input signal from HDMI A port can be looped out for daisy chain connection.
All the other input signals can’t be
looped out.
YPbPr video signal can be connected through VGA input port
(
YPbPr to VGA adapter is required.
[Scaling] - Display Aspect Ratio
[Original AR]: To display
the
input source
with the original
aspect ratio.
[Full Screen]: To extend the image to full
screen.
For
edge blending or video wall, please
select [Full Screen]. Otherwise, it may
show wrong result.
Ensure to set
the right aspect ratio setting
in the projectors.
•
•
•
•
Summary of Contents for MLT-EDGEPRO-2X2
Page 10: ...M www avenview com Page 9...
Page 55: ...Notes www avenview com Page 54...
