3.3
INSTALLATION (MLT-EDGEPRO 2X2) with PC Control Software
www.avenview.com
Page 14
Use the Edgepro setup file and
review these
two files: Readme.txt and Edgepro PC tool.
Connect Micro USB cable between PC and Edgepro (see below).
I
nstall
N
uvoton USB driver using the files under [Edgepro Setup File folder].
Check Device Manager to confirm [
N
uvoton
V
irtual Com Port]
is correctly installed (see below).
GENERAL INSTRUCTIONS
HARDWARE CONNECTION
- HDMI Loop Out port on the rear panel is for daisy chain connection.
- Only the input signal from HDMI-A input port can be cascaded to another unit for larger installs.
Please dont use it as an input port.
- The Two outputs from EDGEPRO will be shown simultaneously, duplicated from the source.
NOTE
:
It is not designed to output to 2 independent displays.
(Please contact sales@avenview for the model
that supports this feature.
Summary of Contents for MLT-EDGEPRO-2X2
Page 10: ...M www avenview com Page 9...
Page 55: ...Notes www avenview com Page 54...
