3
.
8
Geometry Correction and Edge Blending
www.avenview.com
Page
2
9
Under [Anyplace] menu,
the user can find
the
(5) five
main
features
of MLT-EDGEP
R
O-2X2
such as geometry
alignment, edge blending and warping.
The
geometry alignment
functions found in
[Anyplace] is
the
same as tier one projector brands. It provides
professional performance in single
&
multiple projector applications.
•
[2x2 Corner] alignment can’t co-exist with [3x3 Curved] or [5x3 curved] alignment.
When
you apply [3x3 Curved] or [5x3 curved] function, original [2x2 Corner] alignment will be
reset.
User needs to execute geometry alignment from the beginning.
•
[3x3 Curved] and [5x3 curved] can co-exist.
I
t means if you execute [3x3 curved] alignment first,
then
go to [5x3 curved] alignment for further geometry alignment, [3x3 curved] alignment will not
be rest and user can continuously executing [5x3 curved] alignment.
•
W
e suggest
to
start geometry alignment from [3x3 curved] alignment unless quick corner
alignment is required and not necessary to have precise geometry alignment.
•
Geometry adjustment range in
MLT-EDGEP
R
O-2X2
is based on percentage of the output
resolution.
Higher output
r
esolution
the
more adjustment pixel range.
•
[Edge Blend] provides all the functions for seamless high performance edge blended image.
[
2x2 Corner
] -
Correction
•
[2x2 Corner] alignment is to adjust corner position of the image.
W
hen the screen is flat, this function
will quickly align image to the desired location. If the screen is not flat or has some distortion in the
screen, user needs to use [3x3 Curved] or [5x3 curved] for image geometry alignment.
•
[2x2 Corner] alignment can correct image keystone at vertical and horizontal position.
•
I
t can also adjust image height and width to change the aspect ratio of output image.
This function can’t co-exist with other geometry alignment function. If user applies [3x3 Curved] or
[5x3 Curved] alignment, then go back to [2x2 Corner] menu, the previous geometry alignment will be
reset to default. User can go back to [3x3 Curved] or [5x3 Curved] menu again, it will recall the setting
back to the screen. It means [2x2 Corner] alignment is independent adjustment and can’t combine
with [3x3 Curved] or [5x3 Curved] alignment.
Summary of Contents for MLT-EDGEPRO-2X2
Page 10: ...M www avenview com Page 9...
Page 55: ...Notes www avenview com Page 54...
