Avenview MLT-EDGEPRO-2X2, Product Manual

Page: 47 / 57

3 . 9
OSD Miscellaneous Functions - [Options]
www.avenview.com
Page 46
Accessibility
• In [Accessibility] menu, there are three items can
be set:
OSD [Button Repeat Rate], OSD [Menu Time out]
and [Logo Time Out]
Button Repeat Rate
• OSD [Button Repeat Rate]:
It controls the speed of the response of the OSD
button while user presses OSD button
continuously.
- [Off]: OSD only responds once when every time
OSD key is pressed.
- [Default]: OSD will respond slowly at the
beginning but will increase the speed of the
response when OSD key is pressed continuously.
- [Slow]: OSD behavior is similar to [Default] but
the response speed will be slower than Default.
Menu Time Out
• OSD [Menu Time Out]
OSD menu will disappear from the screen
based on time setting. The default time is 30
seconds.
When [Off] is selected, the OSD menu will
remain in the screen until user activates
other OSD function.
Internal Grid Pattern will be also controlled
by the time setting in [Menu Time Out]
menu.
For [Anyplace] geometry adjustment, we
recommend user to set OSD [Menu Time
Out] to [Off] to maintain continuously
display of the pattern and OSD on the
screen.