3
.
8
Geometry Correction and Edge Blending
www.avenview.com
Page
31
[
3
x
3
C
urved
] -
Geometry Alignment
•
[2x2 Corner] alignment
can’t
co-exist with [3x3 Curved] or [5x3 curved] alignment.
I
t means when you apply [3x3
Curved] or [5x3 curved] function, original [2x2 Corner] alignment will be reset.
The process has to be restarted
from the beginning.
•
[3x3 Curved] and [5x3 curved]
can
co-exist.
I
f you execute [3x3 curved] alignment first, then go to [5x3 curved]
alignment for further geometry alignment, [3x3 curved] alignment will not be rest and user can continuously
executing [5x3 curved] alignment.
•
After executing [5x3 Curved] alignment, user can go back to [3x3 Curved] menu to do further
4
corner position
fine-tune.
It will not reset [5x3 Curved] alignment result
•
W
e suggest
to
start geometry alignment from [3x3 curved] alignment unless quick 4 corner alignment is required
and no need to have precise geometry alignment.
•
There is [
W
arp] hotkey on remote controller for quick access for [Anyplace] menu.
[
Shift
] -
Image 4 Corner Position Alignment
•
[Shift] function is similar to [
4
Corner]
geometry alignment.
•
The adjustment points include 4 corners
of the image.
•
The image change is based on straight
line between two corner points.
Summary of Contents for MLT-EDGEPRO-2X2
Page 10: ...M www avenview com Page 9...
Page 55: ...Notes www avenview com Page 54...
