- 48 -
You can select more than one handle methods. For example, if you choose exception type as “Hard
Disk Error”, you can select “Audible Warning” and “Upload to Center”. When the disk has an error,
the DVR will warning and the center host PC will receive a warning message.
Note: Speed limit function need GPS, user can set that in “Mobile”->“GPS”.
5.8
Mobile Setup
Mobile setup is a special menu for mobile DVR (Fig.5.25), including:
Boot& Halt:
control the power on/ off methods and time of mobile DVR.
GPS:
GPS functions and parameters.
Server Login:
the parameters for login the wireless remote monitoring server.
5.8.1
Boot & Halt Setup
In the boot & halt menu (Fig.5.27),you can setup the shutdown mode and time. There are two
normal modes:
1. Halt Delay
When the KEY interface of the device link with the vehicle’s ignition switch, you can delay halt by
setup the parameters. (The connection method please refer to section 2.3.3)
As in Fig.5.27, user can set a halt delay time which means the DVR will continuously working after the
vehicle power off until exceeding the halt delay time. The minimum delay time is 0 min, the
maximum delay time is 6 hours.
2. Auto Work
If you have directly connected the positive pole of DVR KEY to vehicle battery (Please refer to section
2.3.3), you can also select auto work function.
The auto work time can be set in “Boot & Halt” menu. The device will auto power on/off according to
Fig.5.26 Mobile Setup
Fig.5.27 Boot&Halt
User Manual of DMB-04R Embedded Mobile DVR (V1.0)
