- 46 -
The parameters of adding cruise point are:
Cruise No:
1 to 16;
Preset:
1 to 128, please ensure the preset point has already been defined.
Dwell Time:
the dwell time on the preset point;
Dwell Speed:
the speed from one preset point to another point.
Note: PTZ control and external alarm in can call the sequence. Please refer to section 5.3.1.
Cruise setup:
Cruise is remembering the track of PTZ movement. This movement is manual controlled. In “PTZ” menu, press “Setup” button on the right side
of “Cruise” item, you can enter into “Cruise” setup menu to setup cruise and run the defined cruises. Press “PecCru” button, you will enter into “PTZ control”
interface. You can start controlling PTZ with direction keys, press [ENTER]to save the operation track and return “Cruise” setup menu. Press “StartCru” button
to repeat the PTZ track until you press “Stop” button.
Note: Please make sure the PTZ you are using can support preset point, sequence and cruise.
Fig.5.22
Fig.5.21
User Manual of DMB-04R Embedded Mobile DVR (V1.0)
