Avaya X330W-2DS1, User Manual, Page: 99 / 176

Layer 3 CLI Commands
Avaya X330W-2DS1 User’s Guide 77
ip rip authentication key (Interface context)
Use the
ip rip authentication key
command to set the authentication
string used on the interface. The
no
form of this command clears the password.
Note: This command is executed from the Serial, Loopback, Fast Ethernet and
Fabric Fast Ethernet interfaces.
The syntax for this command is:
[no] ip rip authentication key <password>
Example:
X330WAN-2DS1-1(configure)# ip rip authentication key hush-hush
ip rip authentication mode (Interface context)
Use the
ip rip authentication mode
command to specify the type of
authentication used in RIP Version 2 packets. The
no
form of this command restores
the default value of none.
Note: This command is executed from the Serial, Loopback, Fast Ethernet and
Fabric Fast Ethernet interfaces.
The syntax for this command is:
[no] ip rip authentication mode [simple|none]
Example:
To specify simple authentication to be used in RIP Version 2 packets on the interface
“marketing”.
X330WAN-2DS1-1(configure)# ip rip authentication mode simple
password
The authentication string for the interface. Up to 16 characters are
allowed.
simple|none The authentication type used in RIP Version 2 packets:
• simple - clear text authentication.
• none - no authentication.