Avaya X330W-2DS1, User Manual, Page: 74 / 176

Chapter 7 X330WAN CLI Commands
52 Avaya X330W-2DS1 User’s Guide
The syntax for this command is:
hostname [<hostname_string>]
no hostname
Use the
no hostname
command to return the CLI prompt to its default.
The syntax for this command is:
no hostname
nvram initialize
Use the
nvram initialize
command to reset the WAN parameters to the
factory defaults.
The syntax for this command is:
nvram initialize
Output Example:
X330WAN-2DS1-1(super)# nvram initialize
This command will restore factory defaults, and can disconnect
your telnet session
*** Reset *** - do you want to continue (Y/N)?
Connection closed by foreign host.
host%
reset
Use the
reset
command to restart the system.
If you want to keep changes you made to the current running configuration use the
copy running-config startup-config
command first.
Note: You should perform a reset after downloading software to the device.
The syntax for this command is:
reset
hostname_string none – displays current hostname
string – the string to be used as the hostname
(up to 20 characters).