Avaya X330W-2DS1, User Manual, Page: 155 / 176

WAN CLI Commands
Avaya X330W-2DS1 User’s Guide 133
X330WAN-2DS1-1(configure)# interface Loopback 1.0
X330WAN-2DS1-1(configure)# no interface Loopback 1.0
interface Serial
Use the
interface Serial
command to create and/or enter Interface Serial
configuration mode (context). For LAN interfaces, use this command to create the
interface. Use the
no
form of this command to delete an IP interface.
The syntax for this command is:
[no] interface Serial [port:channel-group[.ip-interface]]
Example:
To enter Interface Serial mode port 1, channel-group 4 in ip-interface 1:
X330WAN-2DS1-1(configure)# interface Serial 1:4.1
Example:
X330WAN-2DS1-1(configure)# no interface Serial 1:4.1
keepalive (Serial interface context)
Use the
keepalive
command to enable keepalive. Use the
no
form of this
command to disable keepalive.
The syntax for this command is:
[no] keepalive [<Seconds>]
linecode (Controller context)
Use the
linecode
command to select the line-code type for an E1 or T1 line. Use
port The controller number (port number) for this serial port. For
the X330W-2DS1, this value is either 1 or 2.
channel-group An integer. For E1, between 0 and 30; for T1, between 0 and 23.
ip-interface The IP interface number within this interface (as a number of IP
interfaces might be bound to an L3 interface). An integer
between 0 and 1024.
Seconds An integer (0-32767). Entering
keepalive
without a
parameter will return the keepalive to its default of 10 seconds.
Entering
keepalive 0
will disable keepalive.