Avaya X330W-2DS1, User Manual, Page: 106 / 176

Chapter 7 X330WAN CLI Commands
84 Avaya X330W-2DS1 User’s Guide
The syntax for this command is:
[no] ip vrrp <vr-id> auth-key <key-string>
ip vrrp 1 primary 192.168.66.23
(ip vrrp) override addr owner
Use the
ip vrrp override addr owner
command to accept packets
addressed to the IP address(es) associated with the virtual router, such as ICMP,
SNMP, and TELNET (if it is not the IP address owner). Use the
no
form of this
command to discard these packets.
Note: This command is executed from the Fast Ethernet and Fabric Fast Ethernet
interfaces.
The syntax for this command is:
[no] ip vrrp <vr-id> override addr owner
Example:
X330WAN-2DS1-1(configure)# ip vrrp 1 override addr owner
(ip vrrp) preempt
Use the
ip vrrp preempt
command to configure the router to preempt a lower
priority master for the virtual router ID. Use the
no
form of this command to disable
preemption for the virtual router instance. By default, preemption is enabled.
Note: This command is executed from the Fast Ethernet and Fabric Fast Ethernet
interfaces.
vr-id Virtual Router ID (1-255)
key-string Simple password string
vr-id Virtual Router ID (1-255)