Avaya X330W-2DS1, User Manual, Page: 117 / 176

Layer 3 CLI Commands
Avaya X330W-2DS1 User’s Guide 95
Output Example:
Note: entire name in quotation marks, e.g. "new york".
show ip reverse-arp
Use the
show ip reverse-arp
command to display the IP address of a host,
based on a known MAC address.
The syntax for this command is:
show ip reverse-arp
<mac addr> [<match len>]
Examples:
Output Example:
X330WAN-2DS1-1(super)# sh ip reverse-arp 00:10:a4:98:97:e0
Showing 1 rows
Address MAC Address I/F Type TTL
--------------- ----------------- ----------- ------- --------
149.49.70.68 00:10:a4:98:97:e0 e-70 Dynamic 14355
Routing Protocol is "rip"
Sending updates every 30 seconds, next due in 0 seconds
Invalid after 180 seconds, flushed after 300
Redistributing: rip
Default version control: rip version 1
Interface Version Key
Routing for Networks:
Routing Information Sources:
Gateway Last Update
mac addr MAC address
match len The number of bytes in the address to match
show ip reverse-arp 00:40:0d:67:53:04
List IP's that match the MAC
show ip reverse-arp 00:40:0d:00:00:00 3
List IP's that match a vendor MAC.